HydroMinder
Venturi Dispenser, reservoir mounted, 1 chemistry w/ 1 dispenser
HydroMinder has become the industry standard for liquid level maintenance for over 20 years and proven successful for many applications. When the solution level in a reservoir drops, HydroMinder’s float opens a non-electric, magnetic valve. The flow of water siphons liquid concentrate into the water stream, automatically maintaining the level of ready-to-use solution. When the tank reaches the preset fill level, the HydroMinder shuts off.
Markets
Applications
Tote & Drum Filling Vehicle Chemical Dilution Chemical Delivery
Available in configurations that can dilute chemistries as low at 3000:1
Utilizes Hydro Systems tips and/or Ultra-Lean Discs (ULD's) that allow for up to 20% better dilution accuracy
Certain units feature Ultra-Lean Discs (ULD's) that reduce the risk of clogging due to the presence of environmental contaminants resulting in less maintenance.
HydroMinder Resources
Everything you need all in one place
Models available that can reach dilution ratios as lean as 2500:1
In car wash applications, there is a move towards using ultra-lean chemistries. HydroMinder offers the ability to reach the lean chemistry resulting in the more accurate use of chemistries. More accurate use of chemistries either results in less chemistry waste or the need for rewash or resanitization.
Utilizes Hydro Systems standard tips and ULD's that allow for up to 20% better dilution accuracy
The use of standard Hydro Systems metering tips and ULD's allow for more accurate dilution performance that results in more accurate chemical usage. Other products will result in more chemistry than what is needed resulting in wasted chemistry or not enough chemistry is used resulting in the need for a rewash.
The use of ULD's with HydroMinder float valves result in less maintenance
ULD's, compared to tips, provide a larger path for chemistries to travel as they enter the HydroMinder eductor. As a result, there is less chance for dirt to accumlate in the ULD resulting in increased HydroMinder uptime.
| KEY | PART NO. | DESCRIPTION |
| 1 | HYD238100 | strainer washer |
| 2 | HYD5065-K | hose swivel |
| 3 | HYD502000 | ball valve |
| 4 | HYD360900 | nipple |
| 5 | HYD10080500 | magnet parts kit |
| a | screw | |
| b | washer | |
| c | magnet cover | |
| d | magnet cap | |
| e | magnet | |
| f | magnet spring | |
| g | magnet yoke | |
| 6 | HYD665520 | valve parts kit |
| h | valve guide ("bonnet") | |
| i | armature spring | |
| j | armature | |
| k | diaphram | |
| 7 | HYD10099886 | mounting bracket kit |
| l | screw | |
| m | Z bracket | |
| n | U clamp | |
| o | lockwasher (not shown) | |
| p | thumbscrew | |
| 8 | HYD10092506 | cast manifold |
| 9 | HYD520000 | water valve body |
| 10 | HYD622900 | coupling |
| 11 | HYD10091989 | adapter, apad |
| 12 | HYD10099885 | Kit, 5 gpm e-gap |
| 13 | HYD3401-R | hosebarb assembly |
| 14 | HYD690014 | metering tip (kit) |
| 15 | HYD10099871 | Kit, ULD 1100-1700 |
| HYD10099870 | Kit, ULD 600-1000 | |
| HYD10099869 | Kit, ULD 300-550 | |
| HYD10099872 | Kit, ULD 1800-2500 | |
| 16 | HYD500870 | tubing, 1/4" x 7' |
| 17 | 509900 | weight |
| 18 | HYD10076301 | Foot valve, Viton |
| 19 | HYD5057-A | discharge tube assembly |
| 20 | HYD5043-A | float & chain assembly |
| HYD507200 | q. bead chain only |
| Key | Part No. | Description |
| 1 | 5051-K | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
| d. magnet cap | ||
| e. magnet | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 2 | 6655-K | valve parts kit |
| g. valve guide assembly | ||
| h. armature spring | ||
| i. armature | ||
| j. diaphragm | ||
| 3 | 520000 | water valve body |
| 4 | 5043-A | float & chain assembly |
| 507200 | bead chain only | |
| 5 | 505600 | elbow (male x female) |
| 6 | 519000 | close nipple |
| 7 | 506000 | elbow (female x female) |
| 8 | 351500 | barb, ¼" MPT x ½" |
| 9 | 502000 | ball valve |
| 10 | 360900 | nipple |
| 11 | 5030-K | mounting bracket kit |
| (specify k. Z-bracket model 502) | m. U-clamp | |
| n. screw | ||
| p. thumbscrew |
| KEY | PART NO. | DESCRIPTION |
| 1 | 238100 | strainer washer |
| 2 | 506500 | hose swivel |
| 3 | 502000 | ball valve |
| 4 | 10080500 | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover, | ||
| d. Magnet cap | ||
| e. magnet assembly | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 5 | 5030-K | mounting bracket kit (specify model 506): includes Z Bracket,U clamp, lock washers, screws and thumbscrews |
| 6 | 6655-P | valve parts kit: |
| h.valve guide("bonnet") | ||
| k. armature spring | ||
| m. armature | ||
| n. diaphram | ||
| 7 | 520000 | water valve body |
| 8 | 505600 | street elbow |
| 9 | 440121 | eductor assembly |
| 10 | 690015 | metering tip (kit) |
| 11 | 5057-A | discharge tube assembly |
| 12 | 5058-9A | suction tube assembly (includes 13 & 14) |
| 13 | 10076301 | foot valve, Viton |
| 14 | 250006 | ceramic weight |
| 15 | 519000 | nipple |
| 16 | 5043-A | float assembly (includes #17 chain) |
| 17 | 507200 | bead chain |
| 18 | 360900 | nipple |
| KEY | PART NO. | DESCRIPTION |
| 1 | 238100 | strainer washer |
| 2 | 506500 | hose swivel |
| 3 | 502000 | ball valve |
| 4 | 360900 | nipple |
| 5 | 10080500 | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
d. magnet cap | ||
| e. magnet | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 6 | 5030-K | mounting bracket kit(specify model 511) |
| h. Z bracket | ||
| i. U clamp | ||
| j. lockwasher (not shown) | ||
| k. screw | ||
| m.thumbscrew | ||
| 7 | 665520 | valve parts kit |
| n. valve guide ("bonnet") | ||
| p. armature spring | ||
| q. armature | ||
| r. diaphram | ||
| 8 | 520000 | water valve body |
| 9 | 505600 | street elbow |
| 10 | 519000 | close nipple, 1/4" |
| 11 | 506000 | elbow |
| 12 | 505900 | nipple, 6" |
| 13 | 506300 | vacuum breaker |
| 14 | 440121 | eductor assembly |
| 440100 | s. eductor body only | |
| 440101 | t. suction stub only | |
| 15 | 690015 | metering tip (kit) |
| 16 | 5057-A | discharge tube assembly |
| 17 | 5058-9A | suction tube assembly |
| 505809 | u. tubing, 1/2" x 9' | |
| 250006 | v. ceramic weight | |
| 10076301 | w. foot valve, Viton | |
| 250700 | (foot valve & weight) | |
| 18 | 5043-A | float & chain assembly |
| 507200 | x. bead chain only |
| KEY | PartNo. | Description |
| 1 | 238100 | strainer washer |
| 2 | 276700 | hose swivel connector |
| 3 | 607600 | ball valve |
| 4 | 5030-K | mounting bracket kit (specify model 525);includes bracket, clamp, screws, etc. |
| 5 | 637900 | hex nipple |
| 6 | 5207-K | magnet parts kit: |
| a. screw | ||
| b. washer | ||
| c. magnet cover , | ||
| d. magnet assembly | ||
| e. spring, magnet, | ||
| f. yoke, magnet | ||
| 7 | 665520 | valve parts kit |
| h. valve guide assy | ||
| i. spring,armature | ||
| j. armature | ||
| k.diaphram | ||
| 8 | 641750 | screw (3 required) |
| 9 | 520000 | water valve body |
| 10 | 419500 | reducing hex nipple |
| 11 | 233100 | street elbow |
| 12 | 506900 | 1/2” elbow bushing |
| 13 | 236500 | bushing |
| 14 | 6331-K | 9 GPM eductor assembly (includes #15 stub) |
| 15 | 440201 | suction stub only |
| 16 | 690015 | metering tip (kit) |
| 17 | 5084-2A | discharge tube assy |
| m. hose clamp | ||
| n. flood-ing ring | ||
| p. tube | ||
| 18 | 5058-9A | suction tube/foot valve assy (includes 17-19) |
| 19 | 505809 | suction tube only |
| 20 | 10076301 | foot valve, Viton |
| 21 | 250006 | ceramic weight (inside tube) |
| 22 | 5043-A | float & chain assemlby |
| 507200 | q. bead chain only |
| Key | Part No. | Description |
| 1 | 238100 | strainer washer |
| 2 | 276700 | hose swivel connector |
| 3 | 607600 | ball valve |
| 4 | 5030-K | mounting bracket kit (specify model 530) Includesbracket, clamp, screws, etc. |
| 5 | 637900 | hex nipple |
| 6 | 5207-K | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
| d. magnet cap | ||
| e. magnet | ||
| f. spring, magnet | ||
| g. yoke, magnet | ||
| 7 | 6655-P | valve parts kit |
| h. valve guide assy. | ||
| i. spring, armature | ||
| j. armature | ||
| k. diaphram | ||
| 8 | 641750 | screw (3 req'd) |
| 9 | 520000 | water valve body |
| 10 | 419500 | reducing hex nipple |
| 11 | 233100 | street elbow |
| 12 | 506900 | 1/2" elbow |
| 13 | 507000 | 6" nipple |
| 14 | 507100 | siphon breaker assembly |
| 15 | 236500 | bushing |
| 16 | 6331-K 9 | GPM eductor ass'y(includes #17 suction stub) |
| 17 | 440201 | suction stub only |
| 18 | 690015 | metering tip kit |
| 19 | 5084-2A | discharge tube assy. |
| m. hose clamp | ||
| n. flooding ring | ||
| p. tube | ||
| 20 | 5058-9A | suction tube/foot valveassembly (includes 21-24) |
| 21 | 505809 | suction tube only |
| 22 | 5093-7 | ring clamp |
| 23 | 10076301 | foot valve, Viton |
| 24 | 250006 | ceramic weight (inside tube) |
| 25 | 5043-A | float & chain assemlby |
| 507200 | q. bead chain only |
| Key | Part No. | Description |
| 1 | 10091907 | actuator assembly |
| 2 | 10091669 | valve kit |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560190 | nipple (3/4 x 2 PVC) |
| 6 | 560210 | elbow(3/4PVC) |
| 7a | 560220 | nipple (3/4 x 6 PVC) 562 only |
| 7b | 560220 | nipple (3/4 x 6 PVC) |
| 8 | 507600 | siphon breaker 562 only |
| 9 | 5083-K | eductor(16GPM) |
| 10 | 690015 | metering tip (kit) |
| 11 | 5058-9 | suction tube assembly |
| a | 505809 | 1/2" x 9' tubing |
| b | 250006 | weight |
| c | 10076301 | foot valve, Viton |
| 12 | 560330 | discharge tube assembly |
| 13 | 10091668 | bracket assembly |
| 14 | 560130 | magnet yoke |
| 15 | 5043-A | float & chain assembly |
| 16 | 560180 | bushing |
| 17 | 508800 | nipple |
| 18 | 508700 | ball valve |
| 19 | 611500 | adapter |
| 20 | 270700 | washer |
| 21 | 607900 | hose swivel |
| 22 | 238100 | strainer washer |
HydroMinder Model 564: Parts Diagram and List
| Key | Part No. | Description |
| 1 | 10091907 | actuator assembly |
| 2 | 10091669 | valve kit |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560230 | nipple (3/4 x 4 PVC) |
| 6 | 560210 | elbow (3/4 PVC) |
| 7 | 560190 | nipple (3/4 x 2) |
| 8 | 560700 | eductor (25 GPM) |
| 9 | 690015 | metering tip (kit) |
| 10 | 5058-9A | suction tube assembly |
| a | 505809 | 1/2" x 9' tubing |
| b | 250006 | weight |
| c | 10076301 | foot valve, Viton |
| 11 | 560330 | discharge tube assembly |
| 12 | 10091668 | bracket assembly |
| 13 | 560130 | magnet yoke |
| 14 | 5043-A | float & chain assembly |
HydroMinder Model 563: Parts Diagram and List
| Key | Part No. | Description |
| 1 | 10091907 | actuator assembly |
| 2 | 10091669 | valve kit |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560190 | nipple (3/4 x 2 PVC) |
| 6 | 560210 | elbow (3/4 PVC) |
| 7 | 560220 | nipple (3/4 x 6 PVC) |
| 8 | 507600 | siphon breaker |
| 9 | 560700 | eductor (25 GPM) |
| 10 | 690015 | metering tip (kit) |
| a | 5058-9A | suction tube assembly |
| b | 505809 | 1/2" x 9' tubing |
| c | 250006 | weight |
| 11 | 10076301 | foot valve, Viton |
| 12 | 560330 | discharge tube assembly |
| 13 | 10091668 | bracket assembly |
| 14 | 560130 | magnet yoke |
| 15 | 5043-A | float & chain assembly |
| Key | Part No. | Description |
| 1 | 10091907 | ctuator assembly |
| 2 | 10091661 | valve |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560230 | nipple (3/4 x 4 PVC) |
| 6 | 560210 | elbow (3/4 PVC) |
| 7 | 419337 | ¾" hose barb |
| 8 | 570001 | discharge tube ¾" x 1' |
| a | 372900 | hose clamp |
| 9 | 10091668 | bracket assembly(Supplied on Model 572 only) |
| 10 | 560130 | magnet yoke |
| 11 | 5043-A | float & chain assembly |
| Key | Part No. | Description |
| 1 | 238100 | strainer washer |
| 2 | 5065-K | hose swivel |
| 3 | 502000 | ball valve |
| 4 | 360900 | nipple |
| 5 | 10080500 | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
| d. magnet cap | ||
| e. magnet | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 6 | 665520 | valve parts kit |
| h. valve guide ("bonnet") | ||
| i. armature spring | ||
| j. armature | ||
| k. diaphram | ||
| 7 | 5030-K | mounting bracket kit(specify model 511) |
| l. screw | ||
| m.Z bracket | ||
| n. U clamp | ||
| o. lockwasher (not shown) | ||
| p. thumbscrew | ||
| 8 | 520000 | water valve body |
| 9 | 505600 | street elbow |
| 10 | 519000 | close nipple, 1/4" |
| 11 | 90076020 | adapter, eductor |
| 12 | 10092505 | Kit, 3.5 gpm e-gap |
| 13 | 3401-R | hosebarb assembly |
| 14 | 690014 | metering tip (kit) |
| 15 | 500870 | tubing, 1/4" x 7' |
| 16 | 509900 | weight |
| 17 | 10076301 | Foot valve, Viton |
| 18 | 5057-A | discharge tube assembly |
| 19 | 5043-A | float & chain assembly |
| 507200 | q. bead chain only |
No files found.
Models available that can reach dilution ratios as lean as 2500:1
In car wash applications, there is a move towards using ultra-lean chemistries. HydroMinder offers the ability to reach the lean chemistry resulting in the more accurate use of chemistries. More accurate use of chemistries either results in less chemistry waste or the need for rewash or resanitization.
Utilizes Hydro Systems standard tips and ULD's that allow for up to 20% better dilution accuracy
The use of standard Hydro Systems metering tips and ULD's allow for more accurate dilution performance that results in more accurate chemical usage. Other products will result in more chemistry than what is needed resulting in wasted chemistry or not enough chemistry is used resulting in the need for a rewash.
The use of ULD's with HydroMinder float valves result in less maintenance
ULD's, compared to tips, provide a larger path for chemistries to travel as they enter the HydroMinder eductor. As a result, there is less chance for dirt to accumlate in the ULD resulting in increased HydroMinder uptime.
| KEY | PART NO. | DESCRIPTION |
| 1 | HYD238100 | strainer washer |
| 2 | HYD5065-K | hose swivel |
| 3 | HYD502000 | ball valve |
| 4 | HYD360900 | nipple |
| 5 | HYD10080500 | magnet parts kit |
| a | screw | |
| b | washer | |
| c | magnet cover | |
| d | magnet cap | |
| e | magnet | |
| f | magnet spring | |
| g | magnet yoke | |
| 6 | HYD665520 | valve parts kit |
| h | valve guide ("bonnet") | |
| i | armature spring | |
| j | armature | |
| k | diaphram | |
| 7 | HYD10099886 | mounting bracket kit |
| l | screw | |
| m | Z bracket | |
| n | U clamp | |
| o | lockwasher (not shown) | |
| p | thumbscrew | |
| 8 | HYD10092506 | cast manifold |
| 9 | HYD520000 | water valve body |
| 10 | HYD622900 | coupling |
| 11 | HYD10091989 | adapter, apad |
| 12 | HYD10099885 | Kit, 5 gpm e-gap |
| 13 | HYD3401-R | hosebarb assembly |
| 14 | HYD690014 | metering tip (kit) |
| 15 | HYD10099871 | Kit, ULD 1100-1700 |
| HYD10099870 | Kit, ULD 600-1000 | |
| HYD10099869 | Kit, ULD 300-550 | |
| HYD10099872 | Kit, ULD 1800-2500 | |
| 16 | HYD500870 | tubing, 1/4" x 7' |
| 17 | 509900 | weight |
| 18 | HYD10076301 | Foot valve, Viton |
| 19 | HYD5057-A | discharge tube assembly |
| 20 | HYD5043-A | float & chain assembly |
| HYD507200 | q. bead chain only |
| Key | Part No. | Description |
| 1 | 5051-K | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
| d. magnet cap | ||
| e. magnet | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 2 | 6655-K | valve parts kit |
| g. valve guide assembly | ||
| h. armature spring | ||
| i. armature | ||
| j. diaphragm | ||
| 3 | 520000 | water valve body |
| 4 | 5043-A | float & chain assembly |
| 507200 | bead chain only | |
| 5 | 505600 | elbow (male x female) |
| 6 | 519000 | close nipple |
| 7 | 506000 | elbow (female x female) |
| 8 | 351500 | barb, ¼" MPT x ½" |
| 9 | 502000 | ball valve |
| 10 | 360900 | nipple |
| 11 | 5030-K | mounting bracket kit |
| (specify k. Z-bracket model 502) | m. U-clamp | |
| n. screw | ||
| p. thumbscrew |
| KEY | PART NO. | DESCRIPTION |
| 1 | 238100 | strainer washer |
| 2 | 506500 | hose swivel |
| 3 | 502000 | ball valve |
| 4 | 10080500 | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover, | ||
| d. Magnet cap | ||
| e. magnet assembly | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 5 | 5030-K | mounting bracket kit (specify model 506): includes Z Bracket,U clamp, lock washers, screws and thumbscrews |
| 6 | 6655-P | valve parts kit: |
| h.valve guide("bonnet") | ||
| k. armature spring | ||
| m. armature | ||
| n. diaphram | ||
| 7 | 520000 | water valve body |
| 8 | 505600 | street elbow |
| 9 | 440121 | eductor assembly |
| 10 | 690015 | metering tip (kit) |
| 11 | 5057-A | discharge tube assembly |
| 12 | 5058-9A | suction tube assembly (includes 13 & 14) |
| 13 | 10076301 | foot valve, Viton |
| 14 | 250006 | ceramic weight |
| 15 | 519000 | nipple |
| 16 | 5043-A | float assembly (includes #17 chain) |
| 17 | 507200 | bead chain |
| 18 | 360900 | nipple |
| KEY | PART NO. | DESCRIPTION |
| 1 | 238100 | strainer washer |
| 2 | 506500 | hose swivel |
| 3 | 502000 | ball valve |
| 4 | 360900 | nipple |
| 5 | 10080500 | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
d. magnet cap | ||
| e. magnet | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 6 | 5030-K | mounting bracket kit(specify model 511) |
| h. Z bracket | ||
| i. U clamp | ||
| j. lockwasher (not shown) | ||
| k. screw | ||
| m.thumbscrew | ||
| 7 | 665520 | valve parts kit |
| n. valve guide ("bonnet") | ||
| p. armature spring | ||
| q. armature | ||
| r. diaphram | ||
| 8 | 520000 | water valve body |
| 9 | 505600 | street elbow |
| 10 | 519000 | close nipple, 1/4" |
| 11 | 506000 | elbow |
| 12 | 505900 | nipple, 6" |
| 13 | 506300 | vacuum breaker |
| 14 | 440121 | eductor assembly |
| 440100 | s. eductor body only | |
| 440101 | t. suction stub only | |
| 15 | 690015 | metering tip (kit) |
| 16 | 5057-A | discharge tube assembly |
| 17 | 5058-9A | suction tube assembly |
| 505809 | u. tubing, 1/2" x 9' | |
| 250006 | v. ceramic weight | |
| 10076301 | w. foot valve, Viton | |
| 250700 | (foot valve & weight) | |
| 18 | 5043-A | float & chain assembly |
| 507200 | x. bead chain only |
| KEY | PartNo. | Description |
| 1 | 238100 | strainer washer |
| 2 | 276700 | hose swivel connector |
| 3 | 607600 | ball valve |
| 4 | 5030-K | mounting bracket kit (specify model 525);includes bracket, clamp, screws, etc. |
| 5 | 637900 | hex nipple |
| 6 | 5207-K | magnet parts kit: |
| a. screw | ||
| b. washer | ||
| c. magnet cover , | ||
| d. magnet assembly | ||
| e. spring, magnet, | ||
| f. yoke, magnet | ||
| 7 | 665520 | valve parts kit |
| h. valve guide assy | ||
| i. spring,armature | ||
| j. armature | ||
| k.diaphram | ||
| 8 | 641750 | screw (3 required) |
| 9 | 520000 | water valve body |
| 10 | 419500 | reducing hex nipple |
| 11 | 233100 | street elbow |
| 12 | 506900 | 1/2” elbow bushing |
| 13 | 236500 | bushing |
| 14 | 6331-K | 9 GPM eductor assembly (includes #15 stub) |
| 15 | 440201 | suction stub only |
| 16 | 690015 | metering tip (kit) |
| 17 | 5084-2A | discharge tube assy |
| m. hose clamp | ||
| n. flood-ing ring | ||
| p. tube | ||
| 18 | 5058-9A | suction tube/foot valve assy (includes 17-19) |
| 19 | 505809 | suction tube only |
| 20 | 10076301 | foot valve, Viton |
| 21 | 250006 | ceramic weight (inside tube) |
| 22 | 5043-A | float & chain assemlby |
| 507200 | q. bead chain only |
| Key | Part No. | Description |
| 1 | 238100 | strainer washer |
| 2 | 276700 | hose swivel connector |
| 3 | 607600 | ball valve |
| 4 | 5030-K | mounting bracket kit (specify model 530) Includesbracket, clamp, screws, etc. |
| 5 | 637900 | hex nipple |
| 6 | 5207-K | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
| d. magnet cap | ||
| e. magnet | ||
| f. spring, magnet | ||
| g. yoke, magnet | ||
| 7 | 6655-P | valve parts kit |
| h. valve guide assy. | ||
| i. spring, armature | ||
| j. armature | ||
| k. diaphram | ||
| 8 | 641750 | screw (3 req'd) |
| 9 | 520000 | water valve body |
| 10 | 419500 | reducing hex nipple |
| 11 | 233100 | street elbow |
| 12 | 506900 | 1/2" elbow |
| 13 | 507000 | 6" nipple |
| 14 | 507100 | siphon breaker assembly |
| 15 | 236500 | bushing |
| 16 | 6331-K 9 | GPM eductor ass'y(includes #17 suction stub) |
| 17 | 440201 | suction stub only |
| 18 | 690015 | metering tip kit |
| 19 | 5084-2A | discharge tube assy. |
| m. hose clamp | ||
| n. flooding ring | ||
| p. tube | ||
| 20 | 5058-9A | suction tube/foot valveassembly (includes 21-24) |
| 21 | 505809 | suction tube only |
| 22 | 5093-7 | ring clamp |
| 23 | 10076301 | foot valve, Viton |
| 24 | 250006 | ceramic weight (inside tube) |
| 25 | 5043-A | float & chain assemlby |
| 507200 | q. bead chain only |
| Key | Part No. | Description |
| 1 | 10091907 | actuator assembly |
| 2 | 10091669 | valve kit |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560190 | nipple (3/4 x 2 PVC) |
| 6 | 560210 | elbow(3/4PVC) |
| 7a | 560220 | nipple (3/4 x 6 PVC) 562 only |
| 7b | 560220 | nipple (3/4 x 6 PVC) |
| 8 | 507600 | siphon breaker 562 only |
| 9 | 5083-K | eductor(16GPM) |
| 10 | 690015 | metering tip (kit) |
| 11 | 5058-9 | suction tube assembly |
| a | 505809 | 1/2" x 9' tubing |
| b | 250006 | weight |
| c | 10076301 | foot valve, Viton |
| 12 | 560330 | discharge tube assembly |
| 13 | 10091668 | bracket assembly |
| 14 | 560130 | magnet yoke |
| 15 | 5043-A | float & chain assembly |
| 16 | 560180 | bushing |
| 17 | 508800 | nipple |
| 18 | 508700 | ball valve |
| 19 | 611500 | adapter |
| 20 | 270700 | washer |
| 21 | 607900 | hose swivel |
| 22 | 238100 | strainer washer |
HydroMinder Model 564: Parts Diagram and List
| Key | Part No. | Description |
| 1 | 10091907 | actuator assembly |
| 2 | 10091669 | valve kit |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560230 | nipple (3/4 x 4 PVC) |
| 6 | 560210 | elbow (3/4 PVC) |
| 7 | 560190 | nipple (3/4 x 2) |
| 8 | 560700 | eductor (25 GPM) |
| 9 | 690015 | metering tip (kit) |
| 10 | 5058-9A | suction tube assembly |
| a | 505809 | 1/2" x 9' tubing |
| b | 250006 | weight |
| c | 10076301 | foot valve, Viton |
| 11 | 560330 | discharge tube assembly |
| 12 | 10091668 | bracket assembly |
| 13 | 560130 | magnet yoke |
| 14 | 5043-A | float & chain assembly |
HydroMinder Model 563: Parts Diagram and List
| Key | Part No. | Description |
| 1 | 10091907 | actuator assembly |
| 2 | 10091669 | valve kit |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560190 | nipple (3/4 x 2 PVC) |
| 6 | 560210 | elbow (3/4 PVC) |
| 7 | 560220 | nipple (3/4 x 6 PVC) |
| 8 | 507600 | siphon breaker |
| 9 | 560700 | eductor (25 GPM) |
| 10 | 690015 | metering tip (kit) |
| a | 5058-9A | suction tube assembly |
| b | 505809 | 1/2" x 9' tubing |
| c | 250006 | weight |
| 11 | 10076301 | foot valve, Viton |
| 12 | 560330 | discharge tube assembly |
| 13 | 10091668 | bracket assembly |
| 14 | 560130 | magnet yoke |
| 15 | 5043-A | float & chain assembly |
| Key | Part No. | Description |
| 1 | 10091907 | ctuator assembly |
| 2 | 10091661 | valve |
| a | 10091906 | diaphragm replacement kit |
| 3 | 10091902 | bleed screw |
| 4 | 560180 | bushing (3/4 x 1) |
| 5 | 560230 | nipple (3/4 x 4 PVC) |
| 6 | 560210 | elbow (3/4 PVC) |
| 7 | 419337 | ¾" hose barb |
| 8 | 570001 | discharge tube ¾" x 1' |
| a | 372900 | hose clamp |
| 9 | 10091668 | bracket assembly(Supplied on Model 572 only) |
| 10 | 560130 | magnet yoke |
| 11 | 5043-A | float & chain assembly |
| Key | Part No. | Description |
| 1 | 238100 | strainer washer |
| 2 | 5065-K | hose swivel |
| 3 | 502000 | ball valve |
| 4 | 360900 | nipple |
| 5 | 10080500 | magnet parts kit |
| a. screw | ||
| b. washer | ||
| c. magnet cover | ||
| d. magnet cap | ||
| e. magnet | ||
| f. magnet spring | ||
| g. magnet yoke | ||
| 6 | 665520 | valve parts kit |
| h. valve guide ("bonnet") | ||
| i. armature spring | ||
| j. armature | ||
| k. diaphram | ||
| 7 | 5030-K | mounting bracket kit(specify model 511) |
| l. screw | ||
| m.Z bracket | ||
| n. U clamp | ||
| o. lockwasher (not shown) | ||
| p. thumbscrew | ||
| 8 | 520000 | water valve body |
| 9 | 505600 | street elbow |
| 10 | 519000 | close nipple, 1/4" |
| 11 | 90076020 | adapter, eductor |
| 12 | 10092505 | Kit, 3.5 gpm e-gap |
| 13 | 3401-R | hosebarb assembly |
| 14 | 690014 | metering tip (kit) |
| 15 | 500870 | tubing, 1/4" x 7' |
| 16 | 509900 | weight |
| 17 | 10076301 | Foot valve, Viton |
| 18 | 5057-A | discharge tube assembly |
| 19 | 5043-A | float & chain assembly |
| 507200 | q. bead chain only |
No files found.
Ready to get started?
Our experts are here to help. Tell us more about what you need
so we can connect you to the right Hydro experts.
Common Questions
Have a different question? Reach Out
No. The venturi is operated based on hydro power.
2500:1 can be achieved using certain models that feature ULD's.
While car wash is the most common application, it can be used in other industrial applications when water needs to be diluted with chemistry.
Do you offer different models to help me out? Yes. Different models feature different eductors that accommodate different flow rates. Please check the data sheet to choose the correct model.
The answer is that it depends on usage. Hydro has tested HydroMinder in our laboratory to over 300,000 cycles prior to the wear parts needing to be replaced.
Related Products
Related Products
PSG
3798 Round Bottom Road,
Cincinnati, OH 45244
Cincinnati, OH 45244
3798 Round Bottom Road,
Cincinnati, OH 45244
Cincinnati, OH 45244
Hydro Resources
Hydro Resources
For new product, event and industry updates:
By entering your email you agree to receive marketing messages from PSG Hydro. You may unsubscribe at any time.
© 2023 PSG All Rights Reserved | A Dover Company | Privacy Policy | Cookies | Terms of Use